smart capacitor
product description
The product can be used as a single unit or as a compensation system composed of multiple units; it can be used for three-phase compensation, or three-phase and split-phase mixed compensation. Smart capacitors integrate advanced electronic technology, sensor technology, network technology and electrical manufacturing. technology to integrate, network and intelligentize traditional reactive power compensation products. It has changed the structural mode of the existing low-voltage reactive power automatic compensation equipment, greatly improved the reliability and service life of the equipment, and has the overall advantages of simple structure, simple production, reduced cost, improved performance, and easy maintenance.
product model
Shape and installation dimensions
Technical Parameters
Electrical wiring diagram
Other parameters
installation requirements
●When the smart capacitor is used for compensation on the spot, it is not necessary to add body protection. It is only necessary to set up a protective barrier around the smart capacitor, but care should be taken not to place the product exposed in a dusty place.
●When multiple smart capacitors are used together, a protective casing is required. Outdoors should be a stainless steel box with ventilation and heat dissipation and good rainproof ability. Indoors, GGD and other forms of cabinets can be used. The top of the cabinet should be protected from the top and the ground should have concealed and dust-proof ventilation hole shutters. The front and rear door panels are installed at the smart capacitor There should also be louver windows for ventilation and ventilation. If it is a place with a lot of dust, the cabinet body should also pay attention to dust prevention and built-in fans for heat dissipation.
●The size and quantity of the cabinet should be confirmed after the quantity and installation method of the smart capacitors are determined.
installation method.
●Smart capacitors should be installed flat in the cabinet, perpendicular to the ground, with the display facing the front.
The horizontal installation distance between smart capacitors should not be less than 30mm, leaving space for heat dissipation, and the vertical installation distance should not be less than 200mm, which is conducive to heat dissipation and wiring operations.
●For low-voltage cabinets such as GCK, GCS, MNS, etc., it can be flexibly selected and arranged according to its own cabinet space size.
